3CM48* / 3CM8** Austramold Testing
Products that can be Tested:
3CM480
3CM800pg
3CM484
3CM489
Testing:
There are various ways to test depending on if the customer wants to remove the cable from the equipment etc.
- 800-TR to access rear of the elbow while attached to equipment bushing (Suitable for any elbow variants with interface 8 at rear)
- M400DR-B/G to cap off any interface C equipment bushings
- M400BIPA to dead-end the elbow if removed from equipment bushing for testing
#800-TR
#M400DR-B/G
Ralf Glasson – greymouth 03 7682760
Testing:
Technician: Test rod, blank the other end.
Blank, piggy back/standard C type.
Related Articles
Fluke IR Thermometers for Covid testing
Fluke IR Thermometers Announcement COVID-19 RESPONSE Dear Distributor, Over the last couple of weeks Fluke Australia has received countless customer enquiries on Fluke’s Non-Contact Infrared Thermometers range and their ability to determine the ...Euromold Screened Elbows - Separable Connectors
CABLE CONNECTORS, JOINTS & TERMINATIONS Nexans Euromold products include MV-HV Connectors, Joints & Terminations to connect, splice, repair and maintain medium/high voltage cable and power distribution systems – commonly referred to as cable plugs, ...FAQ - Nexans Euromold Screened Connectors
Q: Are the Euromold connectors halogen free? A: Yes, the Euromold connector and all its components are made of halogen free material. Q: Are the Euromold connectors water tight? A: Yes, the Euromold connectors are completely watertight, both at the ...FAQ - Nexans Euromold Bushings
Q: Are Euromold bushings deadbreak or loadbreak bushings? A: Euromold bushings are deadbreak bushings. The power has to be switched off before the connector can be disconnected from the bushing. Q: Is a PITO-E suitable for outdoor use? A: Yes, a ...Redapt adapters and reducers catalogue
This catalogue provides ordering details and options for the complete range of Redapt adapters, reducers, and other accessories.